Blomberg GSN 9122 User Manual download pdf (Page 32)

Rust, discoloration or surface deterioration occurs on dishes

• Salt leakage exists. >>> Salt may cause deterioration and oxidation on

metal surfaces. Pay attention not to spill salt around the salt filling hole

while adding salt. Make sure that the salt reservoir lid is tightly closed after

finishing the filling process. Run the prewash programme to remove the salt

that spilled inside the machine. Since the salt granules that will remain under

the lid will dissolve during prewash, causing the lid loosen, check the lid

once again at the end of the programme.

• Salty food remnants have remained on dishes for a long time. >>> If

silverware soiled with such foods will be kept waiting in machine, dirt must

be removed by prewash or dishes must be washed without being kept

waiting.

• Electric installation is not grounded. >>>Check if your machine is connected

to the actual grounding line. Otherwise, the static electric created in the

product causes arcs on the surfaces of metal items creating pores, removing

the protective cover on the surface and causing discoloration.

• Intensive cleansers such as bleaches are used. >>> Protective cover on

metal surfaces gets damaged and looses its efficiency in time when it gets in

contact with cleansers such as bleach. Do not wash your dishes with bleach.

• Metal items particularly such as knives are used for purposes other then

their intended uses. >>> Protective cover on the edges of knives may get

damaged when they are used for purposes such as opening cans. Do not

use metal kitchen utensils out of their intended uses.

• Silverware are made of low quality stainless steel. >>> Corrosion on such

items is inevitable; they should not be washed in dishwashers.

• Kitchen utensils that are already corroded are washed in dishwasher.

>>> Rust on a corroded item can migrate to other stainless steel surfaces

and cause corrosion on those surfaces as well. Such items should not be

washed in dishwashers.

1 2 ... 27 28 29 30 31 32 33 34 35

No comments

Blomberg GSN 9122 User Manual Page 32