Blomberg TAF 7239 User Manual download pdf (Page 16)

16

EN

5 Maintenance and cleaning

Filter Cartridge / Door Inner Surface

Lint and fibres released from the laundry to the

air during the drying cycle are collected in the

“Filter Cartridge”.

C Such fibre and lint are generally formed

during wearing and washing.

C Always clean the filter and the inner

surfaces of the cover after each drying

process.

C You can clean the filter and filter area by

vacuum cleaner.

To clean the filter:

1. Open the loading door.

2. Remove the cover filter by pulling it up and

open the filter.

3. Clean lint, fibre, and cotton raveling by

hand or with a soft piece of cloth. 4.

Close the filter and place it back into its

seat.

C Clogging may arise on the filter surface

after using your machine for some time; if

this occurs, wash the filter with water and

dry it before using again.

C Clean the entire inner surface of the cover

and door gasket.

.Sensor (models equipped with a sensor)

There are humidity sensors in your machine

that detect whether the laundry is dry or not.

For sensor cleaning;

1. Open the door of the machine.

2. Allow the machine to cool off if drying has

been carried out.

3. Wipe the metal sensors with a soft cloth,

dampened with vinegar and dry them.

C Clean metal sensors 4 times a year.

A Never use solvents, cleaning agents or

substances alike when cleaning as these

might cause fire and explosion!

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 67 68

Comments to this Manuals

No comments