Blomberg GVS 9480 XB20 User Manual download pdf (Page 9)

8

EN

Connection to the drain

Water discharge hose can directly be

connected to the drain hole or sink’s

drainage. The length of this connection

must be min. 50 cm and max. 100 cm

from the floor.

1011

 Open the taps completely after

making the connections to check

for water leaks.

A For your safety, close the water

inlet tap completely after the

washing programme is over.

          















Permitted water temperature: up to

25°C

The dishwasher may not be connected

to open warm water devices or flow-

through water heaters.

 Do not use old or used water inlet

hose on the new product. Use the

new water inlet hose supplied with

the product.

 Connect the water inlet hose

directly to the water tap. Pressure

coming from the tap should be

minimum 0.3 and maximum 10

bars. If the water pressure exceeds

10 bars, a pressure relief valve

should be installed in between.

C Use a screw-on hose connector

to connect the water inlet hose to

a water tap with a ¾ inch external

thread. If required, use a filter

insert to filter deposits from the

pipes.

1009

A discharge hose longer than 4 meters

causes dirty washing.

Attach the water discharge hose

to the drainpipe without bending it.

Tightly fix the water discharge hose to

the drainpipe in order to prevent any

dislocation of the water discharge hose

during operation of the product.

C Drainpipe must be connected to

the sewage system and it should

not be connected to any surface

water.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 30 31

Comments to this Manuals

No comments