Blomberg DW25502SS Installation Manual download pdf (Page 17)

USA



























7.3 READJUSTING FOOT LEVELS

Now that the dishwasher is in the cabinet

you must readjust the feet to bring the

dishwasher up to the required height and

attach it underneath the countertop.

1. Readjust the front foot levels with adjusting

wrench to balance the dishwasher and raise

it up under the countertop, make sure the

unit is level.

2. Readjust the rear foot levels with a

screwdriver to balance the dishwasher and

raise it to the required height using the

brackets supplied.

3. Attach the dishwasher underneath the

countertop with the four screws supplied

(Ø

” x

” - Ø 3.5mm x 14mm). Make

sure you do not go through the top of the

countertop or damage granite.

7.4 ADJUSTING THE MOVABLE TOE KICK

Now that you have successfully installed the dishwasher, you

need to attach the toe kick to the dishwasher. The two piece

toe kick can be adjusted to the height and depth needed for

your kitchen. Be sure to use the slotted toe kick in the front

and the other behind it. They slide into each other.

1. Insert the movable toe kick brackets into the channel (A).

2. Make sure that the plastic tab to the left of the “L” opening

on the dishwasher has not closed the channel you will push

the bracket through.

Notice :

Be sure to notice there is a left and a right bracket.

Adjust the toe kick brackets forward or backwards so that they

will align with the kitchen toe kick (B).

Notice :

• For model, DW 55100 FBI, note that

you should keep the total height of the

dishwasher at 32

1/4

” (819mm) max.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Comments to this Manuals

No comments

Blomberg DW25502SS Installation Manual Page 17

Comments to this Manuals

Related products and manuals for Dishwashers Blomberg DW25502SS