Blomberg DW25502SS Installation Manual download pdf (Page 5)

2

USA

• If the dishwasher is installed in a

location that experiences freezing

temperatures (e.g. in a vacation

home, cabin, etc.), you must drain

all the water from the dishwasher’s

interior. Water system ruptures

that occur as a result of freezing

are not covered by warranty.

• Dishwasher must be secured

to adjacent cabinetry using the

brackets provided. Failure to

do this may cause damage to

property or bodily injury.

• Connect to a properly rated,

protected and sized power supply

circuit to avoid electrical overload.

The dishwasher is designed for an

electrical supply of 120 V (volts),

60 Hz (hertz), AC, connected to

a dishwasher-dedicated, properly

grounded electrical circuit with

a fuse or breakers rated for

15 amperes. Electrical supply

conductors shall be a minimum

of # 16 AWG copper wire rated

at 75 °C (167 °F) or higher.

These requirements must be met

to prevent injury and machine

damage. Consult a qualied

electrician if in doubt.

• Do not use any extension cord or

portable outlet device to connect

the dishwasher to a power supply.

• Ensure that any plastic wrappings,

bags, small pieces etc. are

disposed of safely and kept out of

the reach of children. Danger of

suffocation!

• Remove the door to the washing

compartment when removing

an old dishwasher from service

or discarding it. Ensure that the

appliance presents no danger to

children while being stored for

disposal.

• Old appliances may contain

materials that can be recycled.

Please contact your local recycling

authority about the possibility of

recycling these materials.

Notice :

• The dishwasher drain hose must

be installed with a drain loop at

least 28” (710mm) off the cabinet

oor; otherwise the dishwasher

may not drain properly.

• This dishwasher is intended for

residential use only, and should

not be used in commercial

establishments.

• New installation - If the

dishwasher is a new installation,

most of the work must be done

before the dishwasher is moved

into place.

• Replacement - If the dishwasher

is replacing another dishwasher,

check the existing dishwasher

connections for compatibility with

the new dishwasher, and replace

parts as necessary.

1.1 INSPECT THE DISHWASHER

After unpacking the dishwasher and prior

to installation, thoroughly inspect the

dishwasher for possible freight or cosmetic

damage. Report any damage immediately.

Notice :

• Cosmetic defects must be

reported within 10 days of

installation.

• Do not discard any bags or

items that come with the original

package until after the entire

installation has been completed.

1.2 HOW TO CONTACT US :

You may either call our Toll Free Number at

1-800-459-9848 or contact us via the web

site at

www.blombergappliances.com

or Contact the Blomberg Distributor for

your State or Province as listed on the

Distributor Contact List provided.

1 2 3 4 5 6 7 8 9 10 ... 24 25

Comments to this Manuals

No comments